Catalogue 1 - STAUFF Clamps

A www.stauff.com/1/en/#15 15 Ordering Codes Clamp Body * 1 * 06- * PP-H Clamp Body, STAUFF Group 1A * 1 * 06A- * PP-H One clamp body is consisting of two clamp halves. * STAUFF Group 1 * Exact outside diameter Ø D1 (mm) 06 * Material code (see below) PP-H Clamp Body § Type H Smooth Inside Surface without Tension Clearance Standard Materials Polypropylene Colour: Green Material code: PP-H Polypropylene Colour: Black Material code: PP-H-BK Polyamide Colour: Black Material code: PA-H Thermoplastic Elastomer (87 Shore-A) Colour: Black Material code: SA87-H See pages 178 / 179 for material properties and technical information. Special Materials Please contact STAUFF for further details on fire-proof clamp body materials, tested and approved according to several international fire-protection standards (such as BS 6853, EN 45545-2, UL 94 and many more). See pages 180 / 181 for material properties and technical information. Product Features ƒ Proven, tested and trusted product in various markets ƒ Recommended for the safe installation of hoses and cables ƒ Chamfered edges avoid damaging of the hoses and cables ƒ Available for all commonly used hose and cable outside diameters ƒ Excellent weathering resistance, even under extreme conditions Additional outside diameters are available upon request. Please contact STAUFF for further information. Group Outside Diameter Ordering Codes Dimensions STAUFF DIN Hose (2 Clamp Halves) ( mm / in ) Ø D1 (mm) (in) ( QQ -H = Material) L1 L2 H Width 1 0 6 106- QQ -H 28 9,5 26 30 6,4 1/4 106.4- QQ -H 8 5/16 108- QQ -H 9,5 3/8 109.5- QQ -H 1.10 .37 1.02 1.18 10 110- QQ -H 12 112- QQ -H 1A 1 6 106A- QQ -H 37 20 26 30 6,4 1/4 106.4A- QQ -H 8 5/16 108A- QQ -H 9,5 3/8 109.5A- QQ -H 1.46 .79 1.02 1.18 10 110A- QQ -H 12 112A- QQ -H 2 2 12,7 1/2 212.7- QQ -H 42 26 32 30 13,5 213.5- QQ -H 14 214- QQ -H 15 215- QQ -H 1.65 1.02 1.26 1.18 16 5/8 216- QQ -H 17,2 217.2- QQ -H 18 218- QQ -H 3 3 19 3/4 319- QQ -H 50 33 35,5 30 20 320- QQ -H 21,3 321.3- QQ -H 22 7/8 322- QQ -H 1.97 1.30 1.40 1.18 25 325- QQ -H 25,4 1 325.4- QQ -H 4 4 26,9 426.9- QQ -H 59 40 41,5 30 28 428- QQ -H 30 430- QQ -H 2.32 1.57 1.63 1.18 32 432- QQ -H 5 5 32 1-1/4 532- QQ -H 71 52 56,5 30 33,7 533.7- QQ -H 35 535- QQ -H 38 1-1/2 538- QQ -H 2.80 2.05 2.22 1.18 40 540- QQ -H 42 542- QQ -H 6 6 44,5 1-3/4 644.5- QQ -H 86 66 64,5 30 48,3 648.3- QQ -H 50,8 2 650.8- QQ -H 3.39 2.60 2.54 1.18 54 654- QQ -H 7 7 57,2 2-1/4 757.2- QQ -H 121 94 92 30 60,3 760.3- QQ -H 63,5 2-1/2 763.5- QQ -H 70 2-3/4 770- QQ -H 4.76 3.70 3.62 1.18 73 773- QQ -H 76,1 3 776.1- QQ -H 8 8 88,9 888.9- QQ -H 147 120 116 30 102 4 8102L- QQ -H 5.79 4.72 4.57 1.18 STAUFF Group 1 STAUFF Group 1A to 8 L1 H 10 L 2 ø D1 L2 øD1 L1 H .39 Dimensional drawings: All dimensions in mm (in). Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1