Catalogue 1 - STAUFF Clamps

108 www.stauff.com/1/en/#108 F Catalogue 1 § Edition 01/2024 STAUFF SWG: Stud Welding System Starterkit Type Kit-SWG-WI06-Starter STARTERKIT Starterkit including: ¡ 1 Weld Inverter SWG-WI06 ¡ 1 Weld Gun SWG-WG ¡ 1 Ground Cable SWG-GC ¡ 1 Distance Tube DIT-SR6-SWG-WG30 (for STAUFF Groups 2 to 8) ¡ 5 Stud Retainer SWG-SR6 ¡ 1 Toolkit (Box Spanner/Hex Wrench) ¡ Operating Manual (English / German) Weld Inverter Type SWG-WI06 Characteristics ¡ Works without high-voltage current ¡ No heavy extension cords required ¡ Extremely powerful and robust ¡ Compact in design ¡ Lightweight with only 18 kg / 40 lbs ¡ Welding current: 100 ... 650 A (stepless control) ¡ Welding time: 5 ... 200 ms (stepless control) ¡ Connection Cable: 3 m / 9.84 ft Required Accessories ¡ Weld Gun SWG-WG and Accessories ¡ Ground Cable SWG-GC Technical Data Primary Power ¡ 100 V to 240 V, 1 phase, 50/60 Hz, 16 AT Primary Plug ¡ 16 A 2-pin grounded safety plug (plug type F CEE 7/4) IP Code ¡ IP 44 (also permits operation outdoors) Ambient Temperature Limits ¡ ±0 °C ... +40 °C / +32 °F ... +104 °F Dimensions (L x W x H) ¡ 474 x 337 x 351 mm / 18.66 x 13.27 x 13.82 in Weld Gun - Arc Ignition Type SWG-WG Distance Tube (optional) Distance Adaptor (optional) Weld Gun Stud Retainer (optional) Characteristics ¡ Compact in design ¡ Lightweight with only 0,8 kg / 1.8 lbs (without cable) ¡ Ergonomic handle ¡ Comfortable setup ¡ Connection Cable: 5 m / 16.40 ft Required Accessories ¡ Distance Adaptor SWG-AGS-... for DIN 3015 Clamps ¡ Distance Tube DIT-SR6-SWG-WG30 (for STAUFF Groups 2 to 8) ¡ Distance Tube DIT-SR6-SWG-WG25 (for STAUFF Group 1A) ¡ Stud Retainer SWG-SR6 Technical Data Lift ¡ Adjustment range 3 mm / .11 in, lockable Workplace noise level ¡ Up to 90 dB (A) may occur during welding Dimensions (L x W x H) ¡ 200 x 65 x 140 mm / 7.87 x 2.56 x 5.51 in (without cable, without distance tube) Required Accessories: ¡ Distance Adaptor SWG-AGS-... for DIN 3015 Clamps ¡ Weld Stud SWG-SF ¡ Distance Tube DIT-SR6-SWG-WG25 (for STAUFF Group 1A, if required) Fastening Adaptor (for Use with Mounting Rail TS) Type SWG-MRA-TS14-S-A Fastening Adaptor (for Use with Mounting Rail TS) Type SWG-MRA-TS14-D-A Product Features Fastening Adaptor for Direct Screw Mounting of STAUFF Mounting Rails Type TS-14 with Weld Studs M6 and Bolts M6 or 1/4–20 UNC (Support Sleeve / Washer Recommended). For more information, please see Page 25. Material: Polyamide S L2 B ØD ØD S L1 B 24 (.94) 29 (1.14) 16,5 (.65) 16 (.63) S L2 B ØD ØD S L1 B 36 (1.42) 24 (.94) 16 (.63) 16,5 (.65) Product Features Fastening Adaptor for Direct Screw Mounting of STAUFF Mounting Rails Type TS-14 with Weld Studs M6 and Bolts M6 or 1/4–20 UNC (Support Sleeve / Washer Recommended). For more information, please see Page 25. Material: Polyamide