100 www.stauff.com/1/en/#100 E Catalogue 1 § Edition 01/2024 STAUFF ACT Clamps: Anti-Corrosion Technology ACT Mounting Hardware Material Properties and Handling Instructions ACT Mounting Hardware is made of Stainless Steel V4A (Material Code: W55) with enhanced corrosion resistance by practically excluding metallic and non-metallic impurities during production, processing and handling. ACT Mounting Hardware is always delivered in hermetically-sealed quality storage bags with 25 pieces each to avoid contamination during transport. Always make sure that ACT Mounting Hardware is stored separately from carbon steel and any other metals, and that appropriate tools are used to assemble the clamps. Details: www.stauff.com/act/assembly Material Code W55 ACT Mounting Hardware Installation in Field Trays / Cable Ladders Required components: 1 ACT Self-Locking Nut MUS-HKS ... W55 1 ACT Cover Plate GD ... W55 1 ACT Clamp Body (2 Clamp Halves) 1 ACT Hammerhead Bolt HKS ... W55 Suitable for commonly used field trays and cable ladders with diagonal, lengthwise and/or crosswise slots and perforations. For use with ACT Hammerhead Bolts HKS ... W55 ACT Hammerhead Bolt Type HKS ... W55 G H2 L H3 B H1 For use with Self-Locking ACT Nuts MUS-HKS ... W55 Group Dimensions ( mm / in ) Ordering Code Packaging Unit STAUFF DIN Thread G H Hex (in pieces / bag) 1D 1 M6 5 10 MUS-HKS-M6-W55 25 .20 .39 2D 2 M8 6,5 13 MUS-HKS-M8-W55 25 3D 3 .26 .51 ACT Cover Plate Type GD ... W55 L B øD S H L B øD S H Group Dimensions ( mm / in ) Ordering Code Packaging Unit STAUFF DIN L B H S ØD (in pieces / bag) 1D 1 34 30 7 3 7 GD-1D-W55 25 1.34 1.18 .28 .12 .28 2D 2 52 30 7 3 9 GD-2D-W55 25 2.05 1.18 .28 .12 .35 3D 3 65 30 7 3 9 GD-3D-W55 25 2.56 1.18 .28 .12 .35 Group Dimensions ( mm / in ) Ordering Code Packaging Unit STAUFF DIN G H1 H2 H3 H4min B L (in pcs. / bag) 1D 1 M6 49,3 45 4,3 20 6,1 13,3 HKS-M6x45-W55 25 1.94 1.77 .17 .79 .24 .52 2D 2 M8 49,3 45 4,3 20 6 13,3 HKS-M8x45-W55 25 1.94 1.77 .17 .79 .24 .52 3D 3 M8 59,3 55 4,3 20 6 13,3 HKS-M8x55-W55 25 2.33 2.17 .17 .79 .24 .52 B L G H2 H3 H1 M6 M8 M6 M8 Suitability Chart for ACT Hammerhead Bolts in the Twin Series Lengthwise Perforation Crosswise Perforation ACT Hammerhead Bolts are suitable for field trays and cable ladders with diagonal, lengthwise and/or crosswise slots and perforations that meet the following requirements: Dimension A : 6,2 mm ... 7,0 mm / .24 in ... .28 in (Min ... Max) In case of doubt, please do not hesitate to contact STAUFF prior to field application. A H4 H4 Hex G H All-Metal Self-Locking ACT Nut Type MUS-HKS ... W55 (similar to DIN 980 / Biloc)
RkJQdWJsaXNoZXIy ODUyNzU=