Catalogue 1 - STAUFF Clamps

Catalogue 1 STAUFF Clamps Block Clamps Light Series Construction Series Metal Clamps Saddle Clamps U-Bolt Clamps Special Clamps

Please note: Unless otherwise stated, all data and figures in this product catalogue are approximate values and are only valid as references, which are not binding (also in respect to any third parties’ rights of protection) and thus do not release the customer / user from checking and testing the suitability of the products for the foreseen purposes. Therefore, data and figures can only be used in a limited sense for construction purposes. The application of the products is beyond the control possibilities of the manufacturer and, therefore, is exclusively subject to the responsibility of the customer / user. In the event that a liability is nevertheless considered, any compensation will be limited to the value of the goods supplied by the manufacturer and used by the customer / user. As a matter of course, the manufacturer guarantees the perfect quality of all products in accordance with the General Terms and Conditions of Business and Sale. Subject to modifications due to the ongoing development and improvement of the products. With the publication of this product catalogue, previous editions are no longer valid. Germany Walter Stauffenberg GmbH & Co. KG Im Ehrenfeld 4 58791 Werdohl www.stauff.com STAUFF products and services are globally available through wholly-owned subsidiaries and a tight network of authorised distributors and representatives in all major industrial regions of the world. You can find detailed contact information on the last two pages of this product catalogue or at www.stauff.com/contact.

www.stauff.com/1/en/#3 3 Introduction Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1 Heavy Series according to DIN 3015, Part 2 Twin Series according to DIN 3015, Part 3 Heavy Twin Series STAUFF ACT Clamps: Anti-Corrosion Technology Introduction A B C D STAUFF SWG: Stud Welding System Multi-Line Clamps Custom-Designed Special Clamps Light Series Saddle / Piggyback Clamps F G H I E J Flat Steel and Round Steel U-Bolt Clamps Metal DIN Clamps Construction Series Other Types of Clamps K L M N Technical Appendix Appendix (Product-Specific Abbreviations / Global Contact Directory) O 4 - 11 12 - 35 36 - 57 58- 73 74 - 79 80 - 103 104 - 109 110 - 125 126 - 133 134 - 143 144 - 147 148 - 157 158 - 165 166 - 169 170 - 175 176 - 189 190 - 195

4 www.stauff.com/1/en/#4 Introduction Catalogue 1 § Edition 01/2024 Catalogue 1 STAUFF Clamps Catalogue 2 STAUFF Connect Catalogue 3 STAUFF Flanges Catalogue 4 STAUFF Hose Connectors Catalogue 5 STAUFF Quick Release Couplings Catalogue 6 STAUFF Valves § Block Clamps § Special Clamps § Light Series Clamps § Saddle Clamps § U-Bolt Clamps § Metal Clamps § Construction Series § Tube Connectors § Assembly Tools and Devices § SAE Flanges § Gear Pump Flanges § Hose Connectors § High-Pressure Hose Connectors § Push-to-Connect Couplings § Multi Couplings § Screw-to-Connect Couplings § Two-Way Ball Valves § Multi-Way Ball Valves § Flow Control and Check Valves § Gauge Isolator Valves

www.stauff.com/1/en/#5 5 Introduction Catalogue 1 § Edition 01/2024 Catalogue 7 STAUFF Test Catalogue 8 STAUFF Diagtronics Catalogue 9 STAUFF Filtration Technology Catalogue 10 STAUFF Hydraulic Accessories § Test Couplings § Test Adaptors § Test Hoses and Connectors § Pressure Gauges § Hydraulic Testers § Oil Analysis Equipment § Replacement Filter Elements § Pressure Filters § Return-Line Filters § In-Line Filters § Spin-On Filters § Offline and Bypass Filters § Filtration Systems § Fluid Level and Temperature Indicators § Tank Filler Breathers § Giant and Desiccant Air Breathers § Suction Strainers § Diffusors

6 www.stauff.com/1/en/#6 Introduction Catalogue 1 § Edition 01/2024 STAUFF LINEComponents With the seven dedicatedSTAUFF Line product groups § STAUFF Clamps § STAUFF Connect § STAUFF Flanges § STAUFF Hose Connectors § STAUFF Quick Release Couplings § STAUFF Valves § STAUFF Test from own, in-house development and manufacturing, the companies of the STAUFF Group provide a comprehensive range of components for fastening and connecting pipes, tubes and hoses for mobile and industrial hydraulic applications and many other industries. The portfolio is completed by components for shutting-off, regulating, throttling and measuring fluid media. In order to perfectly match each other, STAUFF Line products are designed and offered on a high, uniform level of quality. A large proportion of the range made from steel comes as standard with the premium STAUFF Zinc/Nickel surface coating, which is also optionally available for many of the other components. This coating offers the most reliable surface protection far beyond the previous market standards – even after transport, handling and assembly of the components – and meets all current legal requirements. If desired, Original Equipment Manufacturers can be supported with value-added services, from technical consultation to pre-assembly, assembly and kitting as well as logistics services : § Support with the selection of suitable standard components and ordering options; provision of customised solutions according to customer’s specifications or based on our in-house development – from prototyping to large scale production § Analysis and optimizationof existing and design and developments of new systems aimed at increasing the efficiency and performance of machines and equipment and creating value for customers by reducing the total cost § Pre-assembly, assembly and kittingof individual components to customer-specific system modules § Individually coordinatedprocurement solutions (e.g. web shop and electronic data interchange) and supply models (e.g. from warehousing of customised components to Kanban logistics and just-in-time delivery of pre-fabricated system modules to the assembly lines of the customers) aimed at optimising material flows For more than 50 years, the companies of STAUFF Group have been developing, manufacturing and distributing pipework equipment and hydraulic components for mechanical and plant engineering and for service and industrial maintenance. In addition to mobile and industrial hydraulic machinery, typical applications also include commercial and special purpose vehicles, rail transportation and energy technology. Likewise, STAUFF products are used in marine, oil and gas applications and in the process, food and chemical industries. The overall range currently includes about 50000 standard products as well as numerous special and system solutions according to customer’s specifications or based on our in-house development. All STAUFF products undergo relevant testing in accordance with international regulations and are governed by the high standards of the in-house quality management system. Furthermore, many items have received certifications and approvals from various international institutes, organisations and authorities who have independently confirmed the quality and performance of the products. Wholly-owned manufacturing, sales and service facilities in 18 countries and a tight global network of authorised distribution partners ensure high presence and service paired with a maximum of availability. Quality Management – ISO 9001:2015 Environmental Management – ISO 14001:2015 Safety Management – ISO 45001:2018 Energy Management – ISO 50001:2018

www.stauff.com/1/en/#7 7 Introduction Catalogue 1 § Edition 01/2024 Aligned with the needs of the market, the product groups § STAUFF Test § STAUFF Diagtronics § STAUFF Filtration Technology § STAUFF Hydraulic Accessories include a comprehensive range of analogue and digital measuring equipment and devices, filtration systems and replacement filter elements as well as accessories for the construction of tanks, reservoirs, power packs and gear boxes in mobile and industrial hydraulics. The offer is completed by relevant value-added services: § Support with the selection of suitable components and ordering options; provision of customised solutions according to customer’s specifications or based on our in-house development – from prototyping to large scale production § Analysis of existing hydraulic circuits aimed at filtration systems, tank components and monitoring devices that perfectly match to the specific requirements, and developing integrated concepts to increase the efficiency and performance of machines and equipment § Individually coordinatedprocurement solutions and supply models

8 www.stauff.com/1/en/#8 Introduction Catalogue 1 § Edition 01/2024 STAUFF Clamps For more than 50 years, STAUFF Clamps symbolise quick and easy as well as secure installation of pipes, tubes, hoses, cables and other flexible and rigid components with outside diameters up to 1016 mm / 40.00 inch. Their vibration and noise reducing features are appreciated as being an important contribution to environmental protection and occupational health and safety. The processing of fire-proof clamp body materials, tested and approved according to several international fire-protection standards (such as BS 6853, EN 45545-2, UL 94) is only one of the many particular strengths of STAUFF. STAUFF guarantees prompt service, even for customised solutions according to customer’s specifications or based on our in-house development. For selected types and series, independent certificates and approvals can be provided: § American Bureau of Shipping § Bureau Veritas § Department of the Navy, New York § Germanischer Lloyd § Lloyd’s Register of Shipping § Registro Italiano Navale § Technischer Überwachungsverein § United States Coast Guard For the finishing of the range of pipe, tube, hose and cable clamps as well as metal hardware in carbon steel, STAUFF relies on the STAUFF Zinc/Nickel surface coating which has proven successful for many years. It provides reliable surface protection – even after transport, handling and assembly – and meets all current legal requirements. Versions in stainless steel V2A and V4A are generally available from stock. Alternative materials and surfaces are available on request.

www.stauff.com/1/en/#9 9 Introduction Catalogue 1 § Edition 01/2024 § Appealing colour scheme with a bright semi-gloss surface finish – comparable to Stainless Steel § Significantly reduced tendency to corrosion by contact with other metals (such as Aluminium and Stainless Steel) § Improved abrasion resistance due to the ductility / plastic deformability of the coating § Little to no risk of triggering allergies – nickel release is down to only a fraction of the statutory limits relating to objects which come into direct and prolonged contact with the skin (independent results of the reference test method according DIN EN 1811 are available on request) § Good paint adhesion properties § Resistance against all commonly used hydraulic media § At least 1200 hours resistance to red rust / base metal corrosion under practical conditions in the salt-spray chamber according to DIN EN ISO 9227 § White rust occurs only by way of a slight grey haze § Surpassing the requirements of the corrosion protection class K5 as defined by the VDMA, the German Engineering Association (360 hours resistance to white rust / 720 hours resistance to red rust) § Free of hexavalent chrome Cr(VI) § ELV compliant according to 2000/53/EC (End of Life Vehicles Directive) § REACH compliant according to 1907/2006/EC (Registration, Evaluation, Authorisation and Restriction of Chemicals) § RoHS compliant according to 2002/95/EC (Restrictions of the Use of Hazardous Substances) STAUFF Zinc/Nickel Coating Layers Sealing Passivation Zinc/Nickel Steel With at least 1200 hours resistance against red rust, the STAUFF Zinc/Nickel surface coating offers excellent surface protection – even after transport, handling and assembly. This was confirmed by testing in the salt-spray chamber according to DIN EN ISO 9227. Users across all industries and applications benefit from sophisticated technology, which has been developed for and used by the very demanding automotive industry for many years now and that is already the proven standard for a large proportion of STAUFF components since 2007.

10 www.stauff.com/1/en/#10 Introduction Catalogue 1 § Edition 01/2024 The STAUFF online catalogue centre at www.stauff.com/catalogues provides fast and direct access to digital versions of this as well as other STAUFF product catalogues in all available languages. www.stauff.com/catalogues Online Page-Flip Catalogues § Easy navigation through index or the powerful full text search functionality § Contents can be shared and forwarded by e-mail, printed or downloaded and saved in PDF file format § Also suitable for mobile devices Download Catalogues § Download entire product catalogues and save them in PDF file format The fastest way to the online page-flip catalogue: The links that can be found at the bottom edge of all pages of this product catalogue will lead you directly to the corresponding page in the online page-flip catalogue. In doing so, contents can be searched, shared and forwarded by e-mail, printed or downloaded and saved in PDF file format. Scan the QR code next to the direct link with the camera of your mobile device* and also use the functions in this way. * may require a suitable app 10 www.stauff.com/1/en/#10 Catalogue 1 § Edition 01/2024

www.stauff.com/1/en/#11 11 Introduction Catalogue 1 § Edition 01/2024 With the STAUFF Digital Platform available at www.stauff.com, commercial customers and users of STAUFF products can not only inform themselves in all detail about the 50000 components typically available from stock, but also directly purchase these online without complex registration. General information about the companies of STAUFF Group, latest business and product news as well as complete global contact details also be available. Immediate access to and free download of 3D models and 2D drawings for a growing number of STAUFF products www.stauff.com www.stauff.com/cad www.filterinterchange.com Online database for the quick and easy identification and interchange of almost all common brands and types of replacement filter elements Main Functionalities of the STAUFF Digital Platform: Around the clock Check stock availability and pricing for STAUFF products in real time Cross references Search by article designations of other manufacturers / suppliers Live chat Get directly in touch with the STAUFF customer service and sales team CAD database Download 3D models and 2D drawings for STAUFF products Advantages as a Registered User of the STAUFF Digital Platform: Purchase STAUFF products Taking customer-specific pricing and delivery conditions into account Ordering w/o searching Quick ordering by entering article number, quantity and requested delivery date File upload Direct upload of orders with multiple positions in CSV or Excel file format Notepad function Create project lists to save interesting products for later Follow STAUFF and keep yourself updated: Linkedin www.linkedin.com/company/stauff Youtube www.youtube.com/stauffgroup STAUFF Newsletters Automatic e-mail notifications about latest news from STAUFF www.stauff.com/newsletter

Clamp Body Profiled Inside Surface with Tension Clearance Clamp Body Smooth Inside Surface without Tension Clearance Clamp Body with Elastomer Insert Noise Reduction Clamp Clamp Body for Conduit Hoses and Cable Inserts Clamp Body Compact Design for both Compact / Regular Hydaulic Hoses Clamp Body Rectangular Design for Proximity Switches 14 15 16 17 18 19 19

A www.stauff.com/1/en/#13 13 Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1 Weld Plate SP Elongated Weld Plate SPV Twin Weld Plate DSP Group Weld Plate RAP Angled Weld Plate WSP Bridge Weld Plate BSP Clamp Body for Multi-Group Weld Plates Multi-Group Weld Plate RAP-MGR Hexagon Rail Nut SM Mounting Rail TS Channel Rail Adaptor CRA Cover Plate DP Hexagon Head Bolt for use with Cover Plate DP AS Safety Washer (DIN 93) SI Safety Washer (DIN 463) SI Socket Cap Screw IS Slotted Head Screw LI Hexagon Head Bolt for use with Insert ES / EP AS Insert ES / EP Safety Locking Plate SIG Stacking Bolt AF Clamp Assemblies Fastening Adaptor SWG-MRA 20 20 21 21 22 22 23 23 24 24 25 28 28 29 29 30 30 30 30 31 31 32 26

A 14 www.stauff.com/1/en/#14 Clamp Body § Profiled Design Profiled Inside Surface with Tension Clearance Group Outside Diameter Nominal Bore Ordering Codes Dimensions STAUFF DIN Pipe / Tube Copper Tube (2ClampHalves) ( mm / in ) Ø D1 Pipe ASTM B88 (mm) (in) (in) (in) ( QQ = Material) L1 L2 H S min. Width 1 0 6 106- QQ 28 9,5 27 0,4 30 6,4 1/4 106.4- QQ 8 5/16 108- QQ 9,5 3/8 1/4 109.5- QQ 1.10 .37 1.06 .02 1.18 10 1/8 110- QQ 12 112- QQ 1A 1 6 106A- QQ 37 20 27 0,4 30 6,4 1/4 106.4A- QQ 8 5/16 108A- QQ 9,5 3/8 1/4 109.5A- QQ 1.46 .79 1.06 .02 1.18 10 1/8 110A- QQ 12 112A- QQ 2 2 12,7 1/2 3/8 212.7- QQ 42 26 33 0,6 30 13,5 1/4 213.5- QQ 14 214- QQ 15 215- QQ 1.65 1.02 1.30 .02 1.18 16 5/8 1/2 216- QQ 17,2 3/8 217.2- QQ 18 218- QQ 3 3 19 3/4 319- QQ 50 33 36 0,6 30 20 320- QQ 21,3 1/2 321.3- QQ 22 7/8 3/4 322- QQ 1.97 1.30 1.42 .02 1.18 25 325- QQ 25,4 1 325.4- QQ 4 4 26,9 3/4 426.9- QQ 59 40 42 0,6 30 28 428- QQ 28,6 1 428.6- QQ 2.32 1.57 1.65 .02 1.18 30 430- QQ 32 432- QQ 5 5 32 1-1/4 532- QQ 71 52 58 0,8 30 33,7 1 533.7- QQ 35 1-1/4 535- QQ 38 1-1/2 538- QQ 2.80 2.05 2.28 .03 1.18 40 540- QQ 41,3 1-1/2 541.3- QQ 42 1-1/4 542- QQ 6 6 44,5 1-3/4 644.5- QQ 86 66 66 0,8 30 48,3 1-1/2 648.3- QQ 50,8 2 650.8- QQ 3.39 2.60 2.60 .03 1.18 54 2 654- QQ 7 7 57,2 2-1/4 757.2- QQ 121 94 93 0,8 30 60,3 2 760.3- QQ 63,5 2-1/2 763.5- QQ 70 2-3/4 770- QQ 4.76 3.70 3.66 .03 1.18 73 2-1/2 (ANSI B 36-10) 773- QQ 76,1 3 2-1/2 (DIN EN 10220) 776.1- QQ 8 8 88,9 3 888.9- QQ 147 120 118 0,8 30 102 4 3-1/2 8102L- QQ 5.79 4.72 4.65 .03 1.18 Standard Materials Polypropylene Colour: Green Material code: PP Polypropylene Colour: Black Material code: PP-BK Polyamide Colour: Black Material code: PA Thermoplastic Elastomer (87 Shore-A) Colour: Black Material code: SA87 Aluminium Colour: Self-Colour Material code: AL (STAUFF Group 1A to 6) See pages 178 / 179 for material properties and technical information. Special Materials Please contact STAUFF for further details on fire-proof clamp body materials, tested and approved according to several international fire-protection standards (such as BS 6853, EN 45545-2, UL 94 and many more). Seepages 180 / 181 for material properties and technical information. Product Features ƒ Proven, tested and trusted product in various markets ƒ Recommended for the safe installation of rigid pipes and tubes ƒ Available for all commonly used pipe and tube outside diameters ƒ Environmental protection due to vibration/noise reducing design ƒ Excellent weathering resistance, even under extreme conditions Ordering Codes Clamp Body * 1 * 06- * PP Clamp Body, STAUFF Group 1A * 1 * 06A- * PP One clamp body is consisting of two clamp halves. * STAUFF Group 1 * Exact outside diameter Ø D1 (mm) 06 * Material code (see below) PP Additional outside diameters are available upon request. Please contact STAUFF for further information. L1 H 10 L2 øD1 S L2 øD1 L1 S H STAUFF Group 1 STAUFF Group 1A to 8 .39 Dimensional drawings: All dimensions in mm (in). Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1

A www.stauff.com/1/en/#15 15 Ordering Codes Clamp Body * 1 * 06- * PP-H Clamp Body, STAUFF Group 1A * 1 * 06A- * PP-H One clamp body is consisting of two clamp halves. * STAUFF Group 1 * Exact outside diameter Ø D1 (mm) 06 * Material code (see below) PP-H Clamp Body § Type H Smooth Inside Surface without Tension Clearance Standard Materials Polypropylene Colour: Green Material code: PP-H Polypropylene Colour: Black Material code: PP-H-BK Polyamide Colour: Black Material code: PA-H Thermoplastic Elastomer (87 Shore-A) Colour: Black Material code: SA87-H See pages 178 / 179 for material properties and technical information. Special Materials Please contact STAUFF for further details on fire-proof clamp body materials, tested and approved according to several international fire-protection standards (such as BS 6853, EN 45545-2, UL 94 and many more). Seepages 180 / 181 for material properties and technical information. Product Features ƒ Proven, tested and trusted product in various markets ƒ Recommended for the safe installation of hoses and cables ƒ Chamfered edges avoid damaging of the hoses and cables ƒ Available for all commonly used hose and cable outside diameters ƒ Excellent weathering resistance, even under extreme conditions Additional outside diameters are available upon request. Please contact STAUFF for further information. Group Outside Diameter Ordering Codes Dimensions STAUFF DIN Hose (2 Clamp Halves) ( mm / in ) Ø D1 (mm) (in) ( QQ -H = Material) L1 L2 H Width 1 0 6 106- QQ -H 28 9,5 26 30 6,4 1/4 106.4- QQ -H 8 5/16 108- QQ -H 9,5 3/8 109.5- QQ -H 1.10 .37 1.02 1.18 10 110- QQ -H 12 112- QQ -H 1A 1 6 106A- QQ -H 37 20 26 30 6,4 1/4 106.4A- QQ -H 8 5/16 108A- QQ -H 9,5 3/8 109.5A- QQ -H 1.46 .79 1.02 1.18 10 110A- QQ -H 12 112A- QQ -H 2 2 12,7 1/2 212.7- QQ -H 42 26 32 30 13,5 213.5- QQ -H 14 214- QQ -H 15 215- QQ -H 1.65 1.02 1.26 1.18 16 5/8 216- QQ -H 17,2 217.2- QQ -H 18 218- QQ -H 3 3 19 3/4 319- QQ -H 50 33 35,5 30 20 320- QQ -H 21,3 321.3- QQ -H 22 7/8 322- QQ -H 1.97 1.30 1.40 1.18 25 325- QQ -H 25,4 1 325.4- QQ -H 4 4 26,9 426.9- QQ -H 59 40 41,5 30 28 428- QQ -H 30 430- QQ -H 2.32 1.57 1.63 1.18 32 432- QQ -H 5 5 32 1-1/4 532- QQ -H 71 52 56,5 30 33,7 533.7- QQ -H 35 535- QQ -H 38 1-1/2 538- QQ -H 2.80 2.05 2.22 1.18 40 540- QQ -H 42 542- QQ -H 6 6 44,5 1-3/4 644.5- QQ -H 86 66 64,5 30 48,3 648.3- QQ -H 50,8 2 650.8- QQ -H 3.39 2.60 2.54 1.18 54 654- QQ -H 7 7 57,2 2-1/4 757.2- QQ -H 121 94 92 30 60,3 760.3- QQ -H 63,5 2-1/2 763.5- QQ -H 70 2-3/4 770- QQ -H 4.76 3.70 3.62 1.18 73 773- QQ -H 76,1 3 776.1- QQ -H 8 8 88,9 888.9- QQ -H 147 120 116 30 102 4 8102L- QQ -H 5.79 4.72 4.57 1.18 STAUFF Group 1 STAUFF Group 1A to 8 L1 H 10 L 2 ø D1 L2 øD1 L1 H .39 Dimensional drawings: All dimensions in mm (in). Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1

A 16 www.stauff.com/1/en/#16 Clamp Body with Elastomer Insert Type RI * Elastomer Inserts for Standard Series clamp bodies, STAUFF Group 4 also fit into Heavy Series clamp bodies, STAUFF Group 4S. Elastomer Inserts for Standard Series clamp bodies, STAUFF Group 6 also fit into Heavy Series clamp bodies, STAUFF Group 5S. Additional outside diameters are available upon request. Please contact STAUFF for further information. Standard Materials Polypropylene Colour: Black Material code: PP-R Polyamide Colour: Black Material code: PA-R Elastomer Insert Thermoplastic Elastomer (73 Shore-A) Colour: Black Material code: SA73 See pages 178 / 179 for material properties and technical information. Special Materials Please contact STAUFF for further details on fire-proof clamp body materials, tested and approved according to several international fire-protection standards (such as BS 6853, EN 45545-2, UL 94 and many more). Seepages 180 / 181 for material properties and technical information. L2 L1 H øD Clamp Body Elastomer Insert with Film Hinge Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1 Group Outside Diameter Ordering Codes ( Q = Material) Dimensions STAUFF DIN Pipe / Tube / Hose ClampAssembly Clamp Body Insert * ( mm / in ) Ø D (Clamp Body + (mm) (in) Insert) (2ClampHalves) L1 L2 H Width 4 4 6 406- Q -R 4- Q -R RI-06-4/4S- Q 59 40 41,2 30 8 5/16 408- Q -R RI-08-4/4S- Q 10 410- Q -R RI-10-4/4S- Q 12 412- Q -R RI-12-4/4S- Q 12,7 1/2 412.7- Q -R RI-12.7-4/4S- Q 14 414- Q -R RI-14-4/4S- Q 2.32 1.57 1.62 1.18 15 415- Q -R RI-15-4/4S- Q 16 5/8 416- Q -R RI-16-4/4S- Q 17,2 417.2- Q -R RI-17.2-4/4S- Q 18 418- Q -R RI-18-4/4S- Q 19 3/4 419- Q -R RI-19-4/4S- Q 5 20 520- Q -R-# 5- Q -R-# RI-20-5- Q -# 71 52 67 30 21,3 521.3- Q -R-# RI-21.3-5- Q -# 22 7/8 522- Q -R-# RI-22-5- Q -# 25 525- Q -R-# RI-25-5- Q -# 26,9 526.9- Q -R-# RI-26.9-5- Q -# 2.80 2.05 2.64 1.18 28 528- Q -R-# RI-28-5- Q -# 30 530- Q -R-# RI-30-5- Q -# 32 1-1/4 532- Q -R-# RI-32-5- Q -# 6 6 20 620- Q -R 6- Q -R RI-20-6/5S- Q 86 66 64,5 30 21,3 621.3- Q -R RI-21.3-6/5S- Q 22 7/8 622- Q -R RI-22-6/5S- Q 25 625- Q -R RI-25-6/5S- Q 26,9 626.9- Q -R RI-26.9-6/5S- Q 3.39 2.60 2.54 1.18 28 628- Q -R RI-28-6/5S- Q 30 630- Q -R RI-30-6/5S- Q 32 1-1/4 632- Q -R RI-32-6/5S- Q 6 35 635- Q -R-# 6- Q -R-# RI-35-6- Q -# 86 66 65 30 38 638- Q -R-# RI-38-6- Q -# 40 640- Q -R-# RI-40-6- Q -# 3.39 2.60 2.56 1.18 42 642- Q -R-# RI-42-6- Q -# Product Features ƒ Proven, tested and trusted product in various markets ƒ Either for the extra vibration/noise reducing installation of pipes and tubes or the extra gentle installation of hoses and cables ƒ Available for all commonly used outside diameters ƒ Excellent weathering resistance, even under extreme conditions Ordering Codes Clamp Assembly *4* 06- * PP-R One assembly is consisting of one clamp body and one insert. * STAUFF Group 4 * Exact outside diameter Ø D (mm) 06 * Material code (see below) PP * Insert R * # = Special Number (only STAUFF Group) 410053 Clamp Body * 4- * PP-R One clamp body is consisting of two clamp halves. * STAUFF Group 4 * Insert R * # = Special Number (only STAUFF Group) 410053 Elastomer Insert * RI- * 06- * 4/4S- * SA73 * Elastomer Insert RI * Exact outside diameter Ø D (mm) 06 * STAUFF Group 4 (DIN) 4/4S 5 (STAUFF) 5 6 (DIN) 6/5S 6 (STAUFF) 6 * Material code (see below) SA73 * # = Special Number (only STAUFF Group) 410053

A www.stauff.com/1/en/#17 17 Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1 Additional outside diameters are available upon request. Please contact STAUFF for further information. Ordering Codes Clamp Assembly * 2 * 12- * PP-NRC One assembly is consisting of one clamp body and one insert. * STAUFF Group 2 * Exact outside diameter Ø D1 (mm) 12 * Material code (see below) PP * Insert NRC NRC Clamp Body * 2- * PP- * RI-S/NRC One NRC clamp body is consisting of two clamp halves. * STAUFF Group 2 * Material code (see below) PP * Clamp Design RI-S/NRC NRC Elastomer Insert * RI-NRC- * 12- * 2- * SA73 One NRC elastomer insert is consisting of two insert halves. * NRCElastomer Insert RI-NRC * Exact outside diameter ØD1 (mm) 12 * STAUFF Group 2 * Material code SA73 Standard Materials Polypropylene Colour: Black Material code: PP Elastomer Insert Thermoplastic Elastomer (73 Shore-A) Colour: Black Material code: SA73 See pages 178 / 179 for material properties and technical information. Alternative materials are available upon request. Please contact STAUFF for further information. Special Materials Please contact STAUFF for further details on fire-proof clamp body materials, tested and approved according to several international fire-protection standards (such as BS 6853, EN 45545-2, UL 94 and many more). Seepages 180 / 181 for material properties and technical information. Noise Reduction Clamp Type NRC L2 L1 H ØD1 Product Features ƒ Designed for the noise and vibration reducing installation of pipes and tubes ƒ Suitable for the most common outside diameters from 6 to 42 mm and from ¼ to 1 ½ inch respectively ƒ Working principle based on a specially shaped, two-part elastomer insert, which mechanically absorbs vibration in the pipe or tube and as a result reduces noises arising to a minimum ƒ Elastomer insert is in particular distinguished by how little of its surface is in contact with the pipe or tube as well as with the clamp body ƒ Light tension of the elastomer insert in mounted condition provides the necessary clamping force ƒ Tongue-groove contour of the elastomer insert and the clamp body (which is reversed and thus diverges from standard DIN 3015 clamps with elastomer insert) enables the system to be used for the maximum range of outside diameters per clamp size, which contributes to flexibility, versatility and optimisation of the required installation space Group Outside Diameter Ordering Codes ( Q = Material) Dimensions STAUFF DIN Pipe / Tube ClampAssembly Clamp Body NRC Insert ( mm / in ) Ø D1 (Clamp Body + (mm) (in) NRC Insert) (2 Clamp Halves) (2 Insert Halves) L1 L2 H Width 2 2 6 206- Q -NRC 2- Q -RI-S/NRC RI-NRC-6-2- Q 42 26 32 30 8 5/16 208- Q -NRC RI-NRC-8-2- Q 10 210- Q -NRC RI-NRC-10-2- Q 1.65 1.02 1.26 1.18 12 212- Q -NRC RI-NRC-12-2- Q 12,7 1/2 212.7- Q -NRC RI-NRC-12.7-2- Q 3 3 14 314- Q -NRC 3- Q -RI-S/NRC RI-NRC-14-3- Q 50 33 35,5 30 15 315- Q -NRC RI-NRC-15-3- Q 1.97 1.30 1.40 1.18 16 5/8 316- Q -NRC RI-NRC-16-3- Q 4 4 18 418- Q -NRC 4- Q -RI-S/NRC RI-NRC-18-4- Q 59 40 41,5 30 20 420- Q -NRC RI-NRC-20-4- Q 2.32 1.57 1.63 1.18 5 5 21,3 521.3- Q -NRC 5- Q -RI-S/NRC RI-NRC-21.3-5- Q 71 52 56,5 30 22 7/8 522- Q -NRC RI-NRC-22-5- Q 25 525- Q -NRC RI-NRC-25-5- Q 26,9 526.9- Q -NRC RI-NRC-26.9-5- Q 2.80 2.05 2.22 1.18 28 528- Q -NRC RI-NRC-28-5- Q 30 530- Q -NRC RI-NRC-30-5- Q 32 1-1/4 532- Q -NRC RI-NRC-32-5- Q 6 6 33,7 633.7- Q -NRC 6- Q -RI-S/NRC RI-NRC-33.7-6- Q 86 66 64,5 30 35 635- Q -NRC RI-NRC-35-6- Q 38 1-1/2 638- Q -NRC RI-NRC-38-6- Q 3.39 2.60 2.54 1.18 40 640- Q -NRC RI-NRC-40-6- Q 42 642- Q -NRC RI-NRC-42-6- Q 7M 45,5 745.5M- Q -NRC 7M- Q -RI-S/NRC RI-NRC-45.5-7M- Q 123 100 100 40 48 748M- Q -NRC RI-NRC-48-7M- Q 51 751M- Q -NRC RI-NRC-51-7M- Q 53,4 753.4M- Q -NRC RI-NRC-53.4-7M- Q 57 757M- Q -NRC RI-NRC-57-7M- Q 4.84 3.94 3.94 1.57 60 760M- Q -NRC RI-NRC-60-7M- Q 63,5 763.5M- Q -NRC RI-NRC-63.5-7M- Q 65 765M- Q -NRC RI-NRC-65-7M- Q 8M 70 870M- Q -NRC 8M- Q -RI-S/NRC RI-NRC-70-8M- Q 165 140 135 45 72 872M- Q -NRC RI-NRC-72-8M- Q 76 876M- Q -NRC RI-NRC-76-8M- Q 6.50 5.51 5.31 1.77 80 880M- Q -NRC RI-NRC-80-8M- Q 88,9 888.9M- Q -NRC RI-NRC-88.9-8M- Q

A 18 www.stauff.com/1/en/#18 Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1 Additional outside diameters are available upon request. Please contact STAUFF for further information. Ordering Codes Clamp Assembly *3*17-*10/14-*PA-CHC*SA80-VO One assembly is consisting of one clamp body and one insert. (consisting of two halves). * STAUFF Group 3 * Nominal Size of the Conduit Hose 17 * Diameter Range Cable ØD (mm) 10/14 * Material code clamp body (see below) PA-CHC * Material code insert (see below) SA80-VO CHC Clamp Body *3*17-*PA-CHC One CHC Clamp Body is consisting of two clamp halves. * STAUFF Group 3 * Nominal Size of the Conduit Hose 17 * Material code clamp body (see below) PA-CHC CHC Elastomer Insert *RI-CHC-*10/14*3*SA80-V0 One CHC Elastomer Insert is consisting of two insert halves. * CHC Elastomer insert RI-CHC * Diameter Range Cable ØD (mm) 10/14 * STAUFF Group 3 * Material code insert (see below) SA80-VO Materials Polyamide Colour: Black Material code: PA-CHC fire-proof clamp body material made of Polyamide Colour: Black Material code: PA-V0-CHC-BK Elastomer Insert Thermoplastic Elastomer (73 Shore-A) Colour: Black Material code: SA73 Elastomer Insert fire-proof clamp body material made of Thermoplastic Elastomer (86 Shore-A) Colour: White Material code: SA80-VO See pages 178 / 179for material properties and technical information. Alternative materials are available upon request. Please contact STAUFF for further information. Clamp Body for Conduit Hoses and Cable Inserts Type CHC Product Features ƒ Design of the inside surface of the clamp body prevents corrugated conduit hoses from sliding ƒ Elastomer Insert for the safe and damage-free installation of single cables as an option ƒ Chamfered edges avoid damaging of the conduit hoses ƒ Available for all commonly used nominal sizes ƒ Excellent weathering resistance, even under extreme conditions Recommended Bolt Lengths (Socket Cap Screw IS) See page 30 for further information on ordering. Group Metric ISO thread Unified coarse (UNC) thread STAUFF DIN 2 2 M6 x 25 1/4–20 UNC x 1 3 3 M6 x 30 1/4–20 UNC x 1-1/8 4 4 M6 x 35 1/4–20 UNC x 1-3/8 5 5 M6 x 50 1/4–20 UNC x 2 6 6 M6 x 60 1/4–20 UNC x 2-1/2 for usewithout Cover Plate DP , assemblywith Weld Plate SP , Hexagon Rail Nut SMandChannel Rail Adaptor CRA . t L2 H ØD Group Nominal ØD ( mm / in ) Ordering Codes ( Q = Material) Dimensions STAUFF DIN Size Cable ClampAssembly ClampBody CHC-Insert ( mm / in ) Conduit (Clamp Body + Hose Insert) (2 Halves) (2 Halves) ØD1 ØD2 t L1 L2 H Width 2 2 10 210- Q 0,5 42 26 32 30 12 6 ... 8 212-6/8- Q - Q 212- Q RI-CHC-6/8-2- Q 13 11 .24 ... .31 .51 .43 .02 1.65 1.02 1.26 1.18 8 ... 10 212-8/10- Q - Q RI-CHC-8/10-2- Q 16 13,5 .31 ... .39 .63 .53 3 3 17 7 ... 10 317-7/10- Q - Q 317- Q RI-CHC-7/10-3- Q 21,5 18 0,7 50 33 35,5 30 .28 ... .39 10 ... 14 317-10/14- Q - Q RI-CHC-10/14-3- Q .85 .71 .03 1.97 1.30 1.40 1.18 .39 ... .55 4 4 23 14 ... 18 423-14/18- Q - Q 423- Q RI-CHC-14/18-4- Q 29 24,5 0,7 59 40 41,5 30 .55 ... .71 18 ... 20 423-18/20- Q - Q RI-CHC-18/20-4- Q 1.14 .96 .03 2.32 1.57 1.63 1.18 .71 ... .79 5 5 29 529- Q 1,0 71 52 56,5 30 36 20 ... 26,9 536-20/26.9- Q - Q 536- Q RI-CHC-20/26.9-5- Q 35 30,5 .79...1.06 1.38 1.20 .04 2.80 2.05 2.22 1.18 26,9...33,7 536-26.9/33.7- Q - Q RI-CHC-26.9/33.75- Q 43 38,5 1.06...1.33 1.69 1.52 6 6 48 33,7 ...42 648- Q 55 49,5 1,0 86 66 64,5 30 1.33...1.65 2.17 1.95 .51 3.39 2.60 2.54 1.18

A www.stauff.com/1/en/#19 19 Clamp Body § Compact Design Type CC Product Features ƒ Only one clamp body required for two different hose diameters (compact hose + regular hose) ƒ Rotate upper clamp half by 180° and use clamp body to fasten compact hoses instead of regular hoses ƒ Available for three different combinations of outside hose diamaters ƒ Outer dimensions according to DIN 3015, Part 1 ƒ Effective cost reduction due to lower inventories Group Outside Diameter Outside Diameter Ordering Codes Dimensions (mm/in) STAUFF DIN Regular Hose Compact Hose (2ClampHalves) Ø D1 Ø D2 H (mm) (in) (mm) (in) ( QQ - Q = Material) L1 L2 RegularHose CompactHose B 3 3 19 .75 17,4 .69 319- QQ - Q -CC-BK 50 33 35,5 34 30 22,2 .87 20,6 .81 322.2- QQ - Q -CC-BK 1.97 1.30 1.40 1.34 1.18 25,4 1.00 23,7 .93 325.4- QQ - Q -CC-BK Additional outside diameters are available upon request. Please contact STAUFF for further information. Ordering Codes Clamp Body * 3 * 19- * PP-H-CC-BK One clamp body is consisting of two clamp halves. * STAUFF Group 3 * Outside diameter Ø D1 (mm) of regular hose 19 * Material code (see below) PP-H-CC-BK Clamp Body § Rectangular Design Type VK Special Materials Please contact STAUFF for further details on fire-proof clamp body materials, tested and approved according to several international fire-protection standards (such as BS 6853, EN 45545-2, UL 94 and many more). Seepages 180 / 181 for material properties and technical information. Product Features ƒ Outer dimensions of clamp body according to Standard Series, STAUFF Group 5 ƒ For proximity switches according to DIN EN 60947-5-2 or similar, rectangular construction, with a square of 40mm x 40mm / 1.57 in x 1.57 in or 40mm x 36mm / 1.57 in x 1.42 in ƒ For proximity switches according to DIN EN 60947-5-2 or similar, round construction, please use Standard Series clamp body, STAUFF Group 4, with the diameter required (e.g. 430-PP) ƒ Use with Hexagon Rail Nut SM and Mounting Rail TS to provide axial and horizontal position adjustment by loosening the bolts Ordering Codes One clamp body is consisting of two clamp halves. Clamp Body 540-40-PP-VK Rectangular design with a square of 40mm x 40mm / 1.57 in x 1.57 in Clamp Body 540-36-PP-VK Rectangular design with a square of 40mm x 36mm / 1.57 in x 1.42 in Please replace PP by PA to order a clamp body made of Polyamide instead of Polypropylene. Standard Materials Polypropylene Colour: Black Material code: PP-H-CC-BK See pages 178 / 179 for material properties and technical information. For Use with Regular Hose For Use with Compact Hose (Upper Clamp Half rotated by 180°) H L2 L1 B Ø D1 H L2 L1 B Ø D2 Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1

A 20 www.stauff.com/1/en/#20 Single Weld Plate Type SP Ordering Codes Weld Plate * SP- * 1- * M- * W2 * Single Weld Plate SP * STAUFF Group 1 * Thread code Metric ISO thread M Unified coarse (UNC) thread U * Material code Carbon Steel, phosphated W2 Carbon Steel, zinc/nickel-plated W3 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Aluminium EN AW-6060 (Dimension S: 5 mm / .20 in) W85 All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Elongated Weld Plate Type SPV Ordering Codes Weld Plate * SPV- * 1- * M- * W2 * Elongated Weld Plate SPV * STAUFF Group 1 * Thread code Metric ISO thread M Unified coarse (UNC) thread U * Material code Carbon Steel, phosphated W2 Carbon Steel, zinc/nickel-plated W3 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. øD B L1 L2 S H øD B L2 S H L1 STAUFF Group 1 STAUFF Group 1A to 8 (7M / 8M) øD2 B L1 L2 S H øD1 L3 øD2 B L2 S H øD1 L3 L1 STAUFF Group 1 STAUFF Group 1A to 8 (7M / 8M) Thread G Thread G Thread G Thread G Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1 Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN Thread G L1 L2 B S H ØD (Standard Options) 1 0 M6 31,5 10 30 3 6,5 12 SP-1-M-W2 1/4–20 UNC 1.24 0.39 1.18 .12 .26 .47 SP-1-U-W2 1A 1 M6 36 20 30 3 6,5 12 SP-1A-M-W2 1/4–20 UNC 1.42 0.79 1.18 .12 .26 .47 SP-1A-U-W2 2 2 M6 42 26 30 3 6,5 12 SP-2-M-W2 1/4–20 UNC 1.65 1.02 1.18 .12 .26 .47 SP-2-U-W2 3 3 M6 50 33 30 3 6,5 12 SP-3-M-W2 1/4–20 UNC 1.97 1.30 1.18 .12 .26 .47 SP-3-U-W2 4 4 M6 60 40 30 3 6,5 12 SP-4-M-W2 1/4–20 UNC 2.36 1.57 1.18 .12 .26 .47 SP-4-U-W2 5 5 M6 71 52 30 3 6,5 12 SP-5-M-W2 1/4–20 UNC 2.80 2.05 1.18 .12 .26 .47 SP-5-U-W2 6 6 M6 88 66 30 3 6,5 12 SP-6-M-W2 1/4–20 UNC 3.46 2.60 1.18 .12 .26 .47 SP-6-U-W2 7 7 M6 122 94 30 5 6,5 12 SP-7-M-W2 1/4–20 UNC 4.80 3.70 1.18 .20 .26 .47 SP-7-U-W2 8 8 M6 148 120 30 5 6,5 12 SP-8-M-W2 1/4–20 UNC 5.83 4.72 1.18 .20 .26 .47 SP-8-U-W2 7M M10 125 100 40 8 5,3 14 SP-7M-M-W2 3/8-16 UNC 4.92 3.94 1.58 .31 .21 .55 SP-7M-U-W2 8M M10 165 140 45 8 5,3 14 SP-8M-M-W2 3/8-16 UNC 6.50 5.51 1.77 .31 .21 .55 SP-8M-U-W2 Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN Thread G L1 L2 L3 B S H ØD1 ØD2 (Standard Options) 1 0 M6 58 24,5 44 30 3 6,5 12 6,5 SPV-1-M-W2 1/4–20 UNC 2.28 .96 1.73 1.18 .12 .26 .47 .26 SPV-1-U-W2 1A 1 M6 64 20 50 30 3 6,5 12 6,5 SPV-1A-M-W2 1/4–20 UNC 2.52 .79 1.97 1.18 .12 .26 .47 .26 SPV-1A-U-W2 2 2 M6 70 26 56 30 3 6,5 12 6,5 SPV-2-M-W2 1/4–20 UNC 2.76 1.02 2.20 1.18 .12 .26 .47 .26 SPV-2-U-W2 3 3 M6 78 33 64 30 3 6,5 12 6,5 SPV-3-M-W2 1/4–20 UNC 3.07 1.30 2.52 1.18 .12 .26 .47 .26 SPV-3-U-W2 4 4 M6 87 40 73 30 3 6,5 12 6,5 SPV-4-M-W2 1/4–20 UNC 3.43 1.57 2.87 1.18 .12 .26 .47 .26 SPV-4-U-W2 5 5 M6 100 52 86 30 3 6,5 12 6,5 SPV-5-M-W2 1/4–20 UNC 3.94 2.05 3.39 1.18 .12 .26 .47 .26 SPV-5-U-W2 6 6 M6 115 66 100 30 3 6,5 12 6,5 SPV-6-M-W2 1/4–20 UNC 4.53 2.60 3.94 1.18 .12 .26 .47 .26 SPV-6-U-W2 7 7 M6 150 94 136 30 5 6,5 12 6,5 SPV-7-M-W2 1/4–20 UNC 5.91 3.70 5.35 1.18 .20 .26 .47 .26 SPV-7-U-W2 8 8 M6 178 120 162 30 5 6,5 12 6,5 SPV-8-M-W2 1/4–20 UNC 7.01 4.72 6.38 1.18 .20 .26 .47 .26 SPV-8-U-W2 7M M10 180 155 100 40 8 15,7 17,8 12 SPV-7M-M-W2 3/8-16 UNC 7.09 6.10 3.94 1.57 .31 .62 .70 .47 SPV-7M-U-W2 8M M10 220 195 140 45 8 15,7 17,8 12 SPV-8M-M-W2 3/8-16 UNC 8.66 7.68 5.51 1.77 .31 .62 .70 .47 SPV-8M-U-W2

A www.stauff.com/1/en/#21 21 B L2 S H øD 23,5 .93 L1 L3 Twin Weld Plate for 2 Clamp Bodies Type DSP Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN Thread G L1 L2 L3 B S H ØD (Standard Options) 1 0 M6 87 40 40 30 3 6.5 12 DSP-1-40-M-W2 1/4–20 UNC 3.43 1.57 1.57 1.18 .12 .26 .47 DSP-1-40-U-W2 1A 1 M6 77 20 37 30 3 6.5 12 DSP-1A-37-M-W2 1/4–20 UNC 3.03 .79 1.46 1.18 .12 .26 .47 DSP-1A-37-U-W2 2 2 M6 86 26 44 30 3 6.5 12 DSP-2-44-M-W2 1/4–20 UNC 3.39 1.02 1.73 1.18 .12 .26 .47 DSP-2-44-U-W2 3 3 M6 102 33 52 30 3 6.5 12 DSP-3-52-M-W2 1/4–20 UNC 4.02 1.30 2.05 1.18 .12 .26 .47 DSP-3-52-U-W2 4 4 M6 120 40 60 30 3 6.5 12 DSP-4-60-M-W2 1/4–20 UNC 4.72 1.57 2.36 1.18 .12 .26 .47 DSP-4-60-U-W2 5 5 M6 145 52 75 30 3 6.5 12 DSP-5-75-M-W2 1/4–20 UNC 5.71 2.05 2.95 1.18 .12 .26 .47 DSP-5-75-U-W2 6 6 M6 178 66 90 30 3 6.5 12 DSP-6-90-M-W2 1/4–20 UNC 7.01 2.60 3.54 1.18 .12 .26 .47 DSP-6-90-U-W2 All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Ordering Codes Weld Plate * DSP- * 1- * 40- * M- * W2 * Twin Weld Plate for 2 Clamp Bodies DSP * STAUFF Group 1 * Pipe center spacing L3 (mm) 40 * Thread code Metric ISO thread M Unified coarse (UNC) thread U * Material code Carbon Steel, phosphated W2 Carbon Steel, zinc/nickel-plated W3 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Group Weld Plate for 5 or 10 Clamp Bodies Type RAP Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN Thread G L1 L2 L3 B S H ØD (Standard Options) 1 0 M6 314 31 31 30 4 6,5 12 RAP-1-31-10-M-W1 1/4–20 UNC 12.36 1.22 1.22 1.18 .16 .26 .47 RAP-1-31-10-U-W1 1A 1 M6 373 20 37 30 4 6,5 12 RAP-1A-37-10-M-W1 1/4–20 UNC 14.69 .79 1.46 1.18 .16 .26 .47 RAP-1A-37-10-U-W1 2 2 M6 442 26 44 30 4 6,5 12 RAP-2-44-10-M-W1 1/4–20 UNC 17.40 1.02 1.73 1.18 .16 .26 .47 RAP-2-44-10-U-W1 3 3 M6 521 33 52 30 4 6,5 12 RAP-3-52-10-M-W1 1/4–20 UNC 20.51 1.30 2.05 1.18 .16 .26 .47 RAP-3-52-10-U-W1 4 4 M6 300 40 60 30 4 6,5 12 RAP-4-60-5-M-W1 1/4–20 UNC 11.81 1.57 2.36 1.18 .16 .26 .47 RAP-4-60-5-U-W1 5 5 M6 378 52 75 30 4 6,5 12 RAP-5-75-5-M-W1 1/4–20 UNC 14.88 2.05 2.95 1.18 .16 .26 .47 RAP-5-75-5-U-W1 6 6 M6 450 66 90 30 4 6,5 12 RAP-6-90-5-M-W1 1/4–20 UNC 17.72 2.60 3.54 1.18 .16 .26 .47 RAP-6-90-5-U-W1 All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Ordering Codes Weld Plate * RAP- * 1- * 31- * 10- * M- * W1 * Group Weld Plate for 5 or 10 Clamp Bodies RAP * STAUFF Group 1 * Pipe center spacing L3 (mm) 31 * Number of clamps 10 * Thread code Metric ISO thread M Unified coarse (UNC) thread U * Material code Carbon Steel, phosphated W2 Carbon Steel, zinc/nickel-plated W3 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 B L2 S H øD L3 L1 L2 STAUFF Group 1 STAUFF Group 1A to 8 B L2 S H øD L3 L1 STAUFF Group 1 STAUFF Group 1A to 8 Thread G Thread G Thread G Thread G Dimensional drawings: All dimensions in mm (in). Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1

A 22 www.stauff.com/1/en/#22 Angled Weld Plate Type WSP Ordering Codes Weld Plate * WSP- * 1- * M- * W2 * Angled Weld Plate WSP * STAUFF Group 1 * Thread code Metric ISO thread M Unified coarse (UNC) thread U * Material code Carbon Steel, phosphated W2 Carbon Steel, zinc/nickel-plated W3 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Bridge Weld Plate Type BSP Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN Thread G L1 L2 B S H1 H2 ØD (Standard Options) 1A 1 M6 48 20 30 3 13 6,5 12 BSP-1A-M-W2 1/4–20 UNC 1.89 .79 1.18 .12 .52 .26 .47 BSP-1A-U-W2 2 2 M6 54 26 30 3 13 6,5 12 BSP-2-M-W2 1/4–20 UNC 2.13 1.02 1.18 .12 .52 .26 .47 BSP-2-U-W2 3 3 M6 62 33 30 3 13 6,5 12 BSP-3-M-W2 1/4–20 UNC 2.44 1.30 1.18 .12 .52 .26 .47 BSP-3-U-W2 4 4 M6 71 40 30 3 13 6,5 12 BSP-4-M-W2 1/4–20 UNC 2.80 1.57 1.18 .12 .52 .26 .47 BSP-4-U-W2 5 5 M6 85 52 30 3 13 6,5 12 BSP-5-M-W2 1/4–20 UNC 3.35 2.05 1.18 .12 .52 .26 .47 BSP-5-U-W2 6 6 M6 98 66 30 3 13 6,5 12 BSP-6-M-W2 1/4–20 UNC 3.86 2.60 1.18 .12 .52 .26 .47 BSP-6-U-W2 Ordering Codes Weld Plate * BSP- * 1A- * M- * W2 * Bridge Weld Plate BSP * STAUFF Group 1A * Thread code Metric ISO thread M Unified coarse (UNC) thread U * Material code Carbon Steel, phosphated W2 Carbon Steel, zinc/nickel-plated W3 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. L2 S øD2 B1 B2 øD1 L1 H L2 S øD2 B1 B2 øD1 L1 H STAUFF Group 1 STAUFF Group 1A to 6 (7M / 8M) B L2 S H2 øD L1 H1 Thread G Thread G Thread G Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1 Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN Thread G L1 L2 B1 B2 S H ØD1 ØD2 (Standard Options) 1 0 M6 30 14 30 30 3 6,5 12 6,5 WSP-1-M-W2 1/4–20 UNC 1.18 .55 1.18 1.18 .12 .26 .47 .26 WSP-1-U-W2 1A 1 M6 36 20 30 30 3 6,5 12 6,5 WSP-1A-M-W2 1/4–20 UNC 1.26 .79 1.18 1.18 .12 .26 .47 .26 WSP-1A-U-W2 2 2 M6 42 26 30 30 3 6,5 12 6,5 WSP-2-M-W2 1/4–20 UNC 1.65 1.02 1.18 1.18 .12 .26 .47 .26 WSP-2-U-W2 3 3 M6 50 33 30 30 3 6,5 12 6,5 WSP-3-M-W2 1/4–20 UNC 1.97 1.30 1.18 1.18 .12 .26 .47 .26 WSP-3-U-W2 4 4 M6 60 40 30 30 3 6,5 12 6,5 WSP-4-M-W2 1/4–20 UNC 2.36 1.57 1.18 1.18 .12 .26 .47 .26 WSP-4-U-W2 5 5 M6 70 52 30 30 3 6,5 12 6,5 WSP-5-M-W2 1/4–20 UNC 2.76 2.05 1.18 1.18 .12 .26 .47 .26 WSP-5-U-W2 6 6 M6 88 66 30 30 3 6,5 12 6,5 WSP-6-M-W2 1/4–20 UNC 3.46 2.60 1.18 1.18 .12 .26 .47 .26 WSP-6-U-W2 7M M10 125 100 50 50 8 5,3 14 6,5 WSP-7M-M-W2 3/8-16 UNC 4.92 3.94 1.97 1.97 .31 .21 .55 .26 WSP-7M-U-W2 8M M10 165 140 50 50 8 5,3 14 6,5 WSP-8M-M-W2 3/8-16 UNC 6.50 5.51 1.97 1.97 .31 .21 .55 .26 WSP-8M-U-W2

A www.stauff.com/1/en/#23 23 Multi-Group Weld Plate for Clamp Body Sizes 2 and 5 (Type MGR) Type RAP-MGR Cover a diamater range from 8mm (.31 in) to 42mm (1.65 in) with only one Group Weld Plate! All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Ordering Codes Weld Plate * RAP-MGR- * 25- * 156- * M- * W1 * Multi Group Weld Plate RAP-MGR * Suitable for STAUFF Group 2 and 5 (only type MGR) 25 * Length L4 (mm) 156 (with 6 weld nuts) 156 234 (with 9 weld nuts) 234 312 (with 12 weld nuts) 312 390 (with 15 weld nuts) 390 520 (with 20 weld nuts) 520 700 (with 27 weld nuts) 700 * Thread code Metric ISO thread M Unified coarse (UNC) thread U * Material code Carbon Steel, uncoated W1 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Number of Dimensions ( mm / in ) Ordering Codes Weld Nuts Thread G L3 L4 B S H ØD (Standard Options) 6 M6 26 156 30 4 6,5 12 RAP-MGR-25-156-M-W1 1/4–20 UNC 1.02 6.14 1.18 .16 .26 .47 RAP-MGR-25-156-U-W1 9 M6 26 234 30 4 6,5 12 RAP-MGR-25-234-M-W1 1/4–20 UNC 1.02 9.21 1.18 .16 .26 .47 RAP-MGR-25-234-U-W1 12 M6 26 312 30 4 6,5 12 RAP-MGR-25-312-M-W1 1/4–20 UNC 1.02 12.28 1.18 .16 .26 .47 RAP-MGR-25-312-U-W1 15 M6 26 390 30 4 6,5 12 RAP-MGR-25-390-M-W1 1/4–20 UNC 1.02 15.35 1.18 .16 .26 .47 RAP-MGR-25-390-U-W1 20 M6 26 520 30 4 6,5 12 RAP-MGR-25-520-M-W1 1/4–20 UNC 1.02 20.47 1.18 .16 .26 .47 RAP-MGR-25-520-U-W1 27 M6 26 700 30 4 6,5 12 RAP-MGR-25-700-M-W1 1/4–20 UNC 1.02 27.55 1.18 .16 .26 .47 RAP-MGR-25-700-U-W1 L3 L3 L3 L3 L3 L4 B S H ØD Thread G Clamp Body for Multi-Group Weld Plate Type MGR Additional outside diameters are available upon request. Please contact STAUFF for further information. Ordering Codes Clamp Body * 5 * 20- * PP-MGR One clamp body is consisting of two clamp halves. * STAUFF Group 5 * Exact outside diameter Ø D1 (mm) 20 * Material code (see below) PP-MGR Standard Materials Polypropylene Colour: Green Material code: PP-MGR Polyamide Colour: Black Material code: PA-MGR See pages 178 / 179 for properties and technical information. Group Outside Diameter Nominal Bore Ordering Codes Dimensions Pipe / Tube Copper Tube (2 Clamp ( mm / in ) Ø D Pipe ASTM B88 Halves) STAUFF DIN (mm) (in) (in) (in) ( QQ = Material) L1 L2 L3 H S min. Width 5 5 20 520- QQ -MGR 71 52 26 58 0,8 30 21,3 1/2 521.3- QQ -MGR 22 3/4 522- QQ -MGR 23 523- QQ -MGR 25 525- QQ -MGR 26,9 3/4 526.9- QQ -MGR 28 528- QQ -MGR 30 530- QQ -MGR 2.80 2.05 1.02 2.28 .03 1.18 32 1-1/4 532- QQ -MGR 33,7 1 533.7- QQ -MGR 35 1-1/4 535- QQ -MGR 38 1-1/2 538- QQ -MGR 40 540- QQ -MGR 42 1-1/4 542- QQ -MGR STAUFF Group 5 L2 L1 L3 L3 Ø D H S Multi-Group Weld Plates (type RAP-MGR) are designed to be used in combination with Standard Series clamp bodies, STAUFF Group 2 (regular types, see pages 14 ff.) covering a diamater range from 8mm / .31 in to 18mm / .71 in, as well as Standard Series clamp bodies, STAUFF Group 5 (type MGR, see above) covering a diamater range from 20mm / .79 in to 42mm / 1.65 in. Thus, all Standard Series metal parts (bolts, cover plates) of these groups can be used. Multi-Group Weld Plate RAP-MGR-25-312-M-W1 Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1

A 24 www.stauff.com/1/en/#24 Hexagon Rail Nut (for Use with Mounting Rail TS) Type SM Mounting Rail (for Use with Hexagon Rail Nut SM) Type TS Ordering Codes Hexagon Rail Nut * SM- * 1-8/1D- * M- * W3 * Hexagon Rail Nut SM * STAUFF Group 1 to 8 (DIN Group 0 to 8) 1-8/1D * Thread code Metric ISO thread M Unified coarse (UNC) thread U * Material code Carbon Steel, zinc/nickel-plated W3 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Mounting Rails, type TS-11/14/30 are suitable for all Standard Series and Twin Series group sizes. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN Thread G L B H1 H2 ØD (Standard Options) 1 0 M6 25,5 10,4 14,2 5,5 12 SM-1-8/1D-M-W3 1A 1 2 2 3 3 4 4 1/4–20 UNC 1.00 .41 .56 .22 .47 SM-1-8/1D-U-W3 5 5 6 6 7 7 8 8 Hexagon Rail Nuts, type SM-1-8/1D are also suitable for Twin Series, STAUFF Group 1D. All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Mounting Rail TS-11 Mounting Rail TS-14 Mounting Rail TS-30 Ordering Codes Mounting Rail * TS- * 11- * 1M- * W1 * Mounting Rail TS * Height of rail 11mm / .43 in 11 14mm / .55 in 14 30mm / 1.18 in 30 * Length of rail 1m / 3.28ft 1M 2m / 6.56ft 2M Alternative lengths available upon request. Contact STAUFF for further information. * Material code Carbon Steel, uncoated W1 Carbon Steel, hot-dip galvanised W98 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Group Dimensions ( mm / in ) Ordering Codes (Standard Options) STAUFF DIN B1 B2 S Length of Rail: 1m / 3.28ft Length of Rail: 2m / 6.56ft 1 0 28 11 2 Height 11mm / .43 in TS-11-1M-W1 Height 11mm / .43 in TS-11-2M-W1 1A 1 2 2 3 3 Height 14mm / .55 in TS-14-1M-W1 Height 14mm / .55 in TS-14-2M-W1 4 4 1.10 .43 .08 5 5 6 6 Height 30mm / 1.18 in TS-30-1M-W1 Height 30mm / 1.18 in TS-30-2M-W1 7 7 8 8 S B1 11 .43 B2 B1 B2 S 14 .55 S B1 30 1.18 B2 L B G H1 H2 ØD L B G H1 H2 ØD Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1

RkJQdWJsaXNoZXIy ODUyNzU=